[RE-wrenches] Sunnyboy 7700 TL

[Chris Mason]

Open it up on a dry day and put a desiccant bag in there, that will absorb
the moisture in it.
You can buy the bags, or if you have one from another unit, put it in a gas
oven with a pilot light and leave it overnight, seal it in a zip lock
immediately to prevent it getting moist again, and put it in the inverter,
without the bag of course.


On Wed, Nov 11, 2015 at 6:56 PM, Jay <jay.peltz at gmail.com> wrote:

> Hi all
>
>
> I've got a newly installed 7700 TL that the display gets foggy after rain.
>
> Inverter is mounted outside, under an eve.
> Seal inside appears in good shape, screws are tight.
>
> Anybody have this problem before/ and fixes?
>
> Thanks
>
> Jay
>
> Peltz power.
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com <http://www.cometenergysystems.com>
264.235.5670
869.662.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20151112/aa8476ec/attachment-0002.html>