[RE-wrenches] Sunnyboy 7700 TL

[Jerry Shafer]

Wrenches
I would open it up during a sunny day low humidity with it running and dry
it out, close it up and check again . I had 8 non SMA inverters get water
in them but it was 1/2 qt of water in mine. SMA inverters are sealed so if
itw moist inside it cant get out and this will resolve it.
Jerry
On Nov 11, 2015 12:58 PM, "Jay" <jay.peltz at gmail.com> wrote:

> Hi all
>
>
> I've got a newly installed 7700 TL that the display gets foggy after rain.
>
> Inverter is mounted outside, under an eve.
> Seal inside appears in good shape, screws are tight.
>
> Anybody have this problem before/ and fixes?
>
> Thanks
>
> Jay
>
> Peltz power.
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20151111/275b8a66/attachment-0002.html>