[RE-wrenches] Ground mount for east-west slope

AE Solar autonomousenergies at gmail.com
Sat Aug 22 06:47:03 PDT 2015


You can use kee klamp swivel fittings with schedule 40 pipe for posts

On Friday, August 21, 2015, jerrysgarage01 <jerrysgarage01 at gmail.com> wrote:

> Wrenches
> Its been a few years but I have gotten top plates from unirac UL- A
> racking that was tilited give them a call or even have them fab-ed up your
> self.
> Jerry
>
>
> Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone
>
>
> -------- Original message --------
> From: frenergy
> Date:08/21/2015 3:31 AM (GMT-10:00)
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Ground mount for east-west slope
>
> We recently did a job like this on a 17 degree slope, if it helps.......
>
> Bill
> Feather River Solar Electric
>
>
> ----- Original Message -----
> From: "William Miller" <william at millersolar.com
> <javascript:_e(%7B%7D,'cvml','william at millersolar.com');>>
> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org
> <javascript:_e(%7B%7D,'cvml','re-wrenches at lists.re-wrenches.org');>>
> Sent: Thursday, August 20, 2015 9:39 PM
> Subject: [RE-wrenches] Ground mount for east-west slope
>
>
> > Friends:
> >
> > I am looking for a ground mount racking system that can be installed on
> a
> > 15 degree slope down to the east. I'd like the verticals to be set in
> > concrete or driven vertically with the horizontals to slope at 15
> degrees.
> >
> > The racking we have used heretofore has required the horizontal members
> to
> > be horizontal and perpendicular to the verticals. What I am seeking
> would
> > allow some adjustment of that angle.
> >
> > Thanks in advance.
> >
> > William
> >
> >
> > _______________________________________________
> > List sponsored by Redwood Alliance
> >
> > List Address: RE-wrenches at lists.re-wrenches.org
> <javascript:_e(%7B%7D,'cvml','RE-wrenches at lists.re-wrenches.org');>
> >
> > Change listserver email address & settings:
> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> >
> > List-Archive:
> >
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> >
> > List rules & etiquette:
> > www.re-wrenches.org/etiquette.htm
> >
> > Check out or update participant bios:
> > www.members.re-wrenches.org
> >
> >
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
> <javascript:_e(%7B%7D,'cvml','RE-wrenches at lists.re-wrenches.org');>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>

-- 
Adam Katzman
Autonomous Energies
4872 State Route 9G
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150822/f8a92a62/attachment-0002.html>


More information about the RE-wrenches mailing list