[RE-wrenches] Ground mount for east-west slope

[jerrysgarage01]

Wrenches
Its been a few years but I have gotten top plates from unirac UL- A racking that was tilited give them a call or even have them fab-ed up your self.
Jerry


Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone

<div>-------- Original message --------</div><div>From: frenergy <frenergy at psln.com> </div><div>Date:08/21/2015  3:31 AM  (GMT-10:00) </div><div>To: RE-wrenches <re-wrenches at lists.re-wrenches.org> </div><div>Subject: Re: [RE-wrenches] Ground mount for east-west slope </div><div>
</div>We recently did a job like this on a 17 degree slope, if it helps.......

Bill
Feather River Solar Electric


----- Original Message ----- 
From: "William Miller" <william at millersolar.com>
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Sent: Thursday, August 20, 2015 9:39 PM
Subject: [RE-wrenches] Ground mount for east-west slope


> Friends:
>
> I am looking for a ground mount racking system that can be installed on a 
> 15 degree slope down to the east. I'd like the verticals to be set in 
> concrete or driven vertically with the horizontals to slope at 15 degrees.
>
> The racking we have used heretofore has required the horizontal members to 
> be horizontal and perpendicular to the verticals. What I am seeking would 
> allow some adjustment of that angle.
>
> Thanks in advance.
>
> William
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150821/e0fe71e7/attachment-0002.html>