[RE-wrenches] Iron Edison Batteries

[Jerry Shafer]

I have installed these batteries, they require a high Charge control
voltage setting. It would be good to service the batteries, changing the
fluid now would prevent the need to pull everything apart later
Jerry
On Jul 26, 2015 2:41 PM, "Tom Lane" <tom at ecs-solar.com> wrote:

> I have a friend who has forty ( 40 ) Iron Edison Batteries , he says they
> are each 1.5 volts and wants to use them for a backup to his aquatics
> business's . Continuous load 24/7 is only 365 watts with surges to 1200
> watts . My guess is that ___# of batteries ( maybe 32 to 36 ? ) can be wire
> as a 48 volt system ? Any suggestion on charge controllers - Morningstar or
> MidNite ? . .? A Samplex pure sign wave inverter 2000 watts at 48 volts and
> an Iota 54 volt battery charger is my guess that it might be the way to
> power the load - any suggestions  . Anyone have experience with Iron Edison
> .any suggestions appreciated !  Gator tom PS : any suggested websites ?
>
> Sent from my iPad
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150726/e08e0962/attachment-0002.html>