[RE-wrenches] Generator brains
Tump
tump at swnl.net
Thu Jul 16 10:55:17 PDT 2015
Using a Atksen Gen wizard will allow the installer to have a; start on low starter battery voltage as well as start on low temp feature. If its a propane unit I always use the carb heater 1) helps the unit start &20 cycles the unit more often in the winter due to the load of the carb heater. OR Why don't you set the ex period for a shorter cycle say 3 days?
On Jul 16, 2015, at 11:03 AM, frenergy wrote:
> Wrenches,
>
> We recently discussed the significant load the brains of many gensets requires, especially in off-grid. I have been trying to keep the start battery and brains of a Kohler 14KW gen charged with a ~40 PV. This works fine until the winter.
>
> Any issues with keeping that PV connected (with its charge controller) and re-connecting the supplied-by-Kohler power source connection to keep the battery and brains happy? I would like to think the PV would take some of the load off the AC connection to the main off-grid system, with no conflicts.
>
> TIA
>
> Bill
> Feather River Solar Electric
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> Tump at swnl.net www.SWNL.net
> Solarwinds Northernlights
> Serving Mid Coast Maine & Northern California
> 207-832-7574 Cl. 610-517-8401
> Blair "TUMP" May
> ******** MAINE'S CHARTER ********
> NABCEP "Certified PV Installer"
>
> ******** MAINE'S CHARTER ********
> Trace Xantrex "Certified" Dealer / Installer"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150716/9a9f5124/attachment-0002.html>
More information about the RE-wrenches
mailing list