[RE-wrenches] 48 VDC to 24 VDC Relay
Chris Worcester
chris at solarwindworks.com
Fri Mar 27 11:20:39 PDT 2015
HI Jerry,
We do have the damper motor running on the Samlex 48V to 24V converter, now we need a relay to switch the motor when the divert load switches on/off.
Chris Worcester
Solar Wind Works
NABCEP Certified PV Installer
Office 530-582-4503
Cell 530-448-9692
Fax 530-582-4603
www.solarwindworks.com
chris at solarwindworks.com
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jerry Shafer
Sent: Thursday, March 26, 2015 2:44 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] 48 VDC to 24 VDC Relay
There is a liniar converter avalible they convert either from 48 to 24 and the other way too. I am away till next week so i cant the brand.
Jerry
On Mar 26, 2015 10:47 AM, "Chris Worcester" <chris at solarwindworks.com> wrote:
Hello fellow wrenches;
We are attempting to control a small 24 VDC motorized damper motor on a nominal 48 VDC off grid system. The damper is next to an Air Heater divert load in a wall that is controlled by a MorningStar TS60 to take the top off the 48 V battery bank at 56.8 volts. We have a 48 VDC Bergey XL.1 on the system now.
So I really can use some advice on finding a relay that will allow power to the damper motor, when the TS60 is on. We are powering the damper motor with a 48V to 24 V DC to DC converter, that is working well, we have an on/off switch in the circuit, for a manual over ride. Thanks in advance for any and all help!
Chris Worcester
Solar Wind Works
NABCEP Certified PV Installer
Office 530-582-4503
Cell 530-448-9692
Fax 530-582-4603
www.solarwindworks.com
chris at solarwindworks.com
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches at lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150327/744f8e38/attachment-0002.html>
More information about the RE-wrenches
mailing list