[RE-wrenches] Corrugated Roof Brackets

[Luke Christy]

Adam,
I'm a big fan of the Corrubracket. We've installed hundreds of them on a whole range of different types of corrugated roofing, with zero problems so far. 
The peel-and stick sealant that comes attached to the bracket works really well, but it can get pulled aside as the fastener goes through and grabs the sealant. I always try to check  the bracket after attachment to make sure that the sealant is fully between the bracket and the roofing, and often I will daub polyurethane caulking on top of the fasteners.

The only thing I don't like is the price point and the fact that the span of the four mounting holes often necessitates some form of blocking.

-Luke


Luke Christy

NABCEP Certified PV Installation Professional™: Certification #031409-25 
NABCEP Certified Solar Heating Installer™: Certification #ST032611-03       
CoSEIA Certified PV Installer 

Solar Gain Services, LLC
PO Box 531
Monte Vista, CO. 81144
SGSRenewables at Gmail.com
719.588.3044
www.sgsrenewables.com


> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
> Behalf Of AE Solar
> Sent: Thursday, March 05, 2015 8:01 AM
> To: RE-wrenches
> Subject: [RE-wrenches] Corrugated Roof Brackets
> 
> 
> 
> Hey Wrenchers,
> 
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> <http://www.s-5.com/clamps/index_2624.cfm> . Its for a very small system on
> a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> 
> Adam
> 
> 
> 
> 
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G 
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
> 
> ******************************************