[RE-wrenches] Aux Output on Outback Devices

[William Miller]

Thank you for looking that up. 

William

Miller Solar

> On Dec 5, 2014, at 7:16 PM, jay peltz <jay at asis.com> wrote:
> 
> this is current, but they are all the same
> 
> I just looked at the 2008 version from the " previous website" and its exactly the same, same page even.
> 
> jay
> 
> 
>> On Dec 5, 2014, at 7:14 PM, William Miller wrote:
>> 
>> Jay:
>>  
>> Is this true for an FX manufactured in 2003?  What version manual is this from?
>>  
>> Wm
>>  
>> <image003.jpg>
>> Lic 773985
>> millersolar.com
>> 805-438-5600
>>  
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay peltz
>> Sent: Friday, December 05, 2014 5:26 PM
>> To: RE-wrenches
>> Subject: Re: [RE-wrenches] Aux Output on Outback Devices
>>  
>> Hi William
>>  
>> Page 23 of the VFX manual states " will reset if short circuited, no fusing is required". 
>>  
>> Jay
>> Peltz power
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141206/7bf7a5ed/attachment-0002.html>