[RE-wrenches] LBX with Magnum?

Baxter, Gary gbaxter at sensata.com
Mon Nov 10 09:01:00 PST 2014


Hi Jeremy,

I think you are talking about two different things here. LBX mode in the SW was for connecting to an AC input which is the same using Connect VDC with the Magnum. I think what  you are referring to here is the cut in voltage after a low battery cutout. On all Magnum inverters the VDC cut in voltage is preset at 12.5, 25, and 50 VDC. If the inverter goes to Low Battery it will start inverting again at these voltages.

Gary

Gary Baxter
Product Manager
Magnum | Dimensions
2211 West Casino Rd.
Everett, WA. 98204
Office 425.353.8833 | Mobile 425.501.0289 | Fax. 425.353.8390

Please Note My New Email Address:

gbaxter at sensata.com | www.magnumenergy.com

A Sensata Technologies Business Unit




-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of All Solar, Inc.
Sent: Saturday, November 08, 2014 9:36 AM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] LBX with Magnum?


Greetings,
I'm trying to set up a magnum inverter to reconnect after a low battery cut out condition at a higher voltage than is presently set. 
Basically like the old SW inverters LBX mode. Magnum tech-support thought using the advanced remote control can work but I'm not seeing that adjustable setting in any of the menus. I would call it low battery cut in. 
There is no AC input to this inverter so we want the batteries to recharge with the PV system until it gets to a higher voltage, say 55 V before the inverter turns back on. 
We also have a midnight charge controller on board but I'm trying to use the inverter features first. 

Jeremy Rodriguez,
President

All Solar, Inc. 
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com

Sent by Jeremy's iPhone. Sorry for typos and shorthand!
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org




More information about the RE-wrenches mailing list