[RE-wrenches] Controlling a Generator without an inverter

[All Solar, Inc.]

Jeremy Rodriguez,
President

All Solar, Inc. 
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com

Sent by Jeremy's iPhone. Sorry for typos and shorthand!

> On Nov 7, 2014, at 1:45 PM, "William Miller" <william at millersolar.com> wrote:
> 
> Friend:
>  
> I am consulting on an installation without an inverter.  We need to start and run a generator to power a Samlex battery charger.  We have a Midnite Classic, but in reviewing the manual it is not clear if the unit can be programmed to control a generator sensibly.  I have a call into Midnite and am awaiting a reply.
>  
> Just starting a generator at a certain low voltage point is inadequate.  The generator needs to run until bulk and absorption are accomplished.
>  
> We did connect an Outback MX60 to a Mate without an FX once.  The menu structure was very different from any manual but we were able to start a generator remotely with the manual relay settings.  I just can’t remember if it is possible to take advantage of all of the AGS features such as multiple start conditions and the absorption timers with a Mate and an FM60.
>  
> Has anyone addressed this scenario?
>  
> William
>  
>  
> <image002.jpg>
> Lic 773985
> millersolar.com
> 805-438-5600
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141108/12f93eda/attachment-0002.html>