[RE-wrenches] 12VDC LED lighting for Edison E26 socket
jay peltz
jay at asis.com
Sun Sep 28 13:00:44 PDT 2014
HI Dan,
I would suggest looking at Backwoods. I've used some of theirs and they are nice.
jay
peltz power
On Sep 28, 2014, at 10:44 AM, Dan Fink wrote:
> Esteemed Wrenches;
> Anyone have any recommendations for 12 volt DC, 3 - 12 watt Edison E26-27 screw base (standard light bulb socket) LED lights? I'm seeing Phocos available and I trust them, but amazon and Ebay are a cesspool of bad Chinese stuff that falls apart on opening the box, and fries if DC voltage gets low, like my 12VDC China CFL experience 10 years ago---50% failure rate for customers, and bought 2 cases of them.
> Is anything reliable, long lasting and sturdy available?
> Thanks in advance for any inputs and insights!
>
>
> Dan Fink
> Buckville Energy
> IREC Certified Instructor™ for:
> ~ PV Installation Professional
> ~ Small Wind Installer
> NABCEP / IREC / ISPQ Accredited Continuing Education Providers™
> 970.672.4342
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list