[RE-wrenches] QO Breakers ok for Back feeding?

[Drake]

Al,

You can backfeed QO Breakers.

Drake


At 05:47 PM 9/16/2014, you wrote:
>Wrenchers,
>One of my associates was asked by an inspector to prove that the QO 
>breaker is rated for back-feeding.    I seem to remember the code 
>stating that as long as the breaker does not state that it is only 
>rated for one direction then it is ok to back feed.
>
>Anyone have a reference to the code or literature from Square D that 
>states it is ok to back feed?
>
>All feedback is appreciated.
>
>Al Frishman
>AeonSolar
>
><tel:%28917%29%20699-6641>(917) 699-6641 - cell
><tel:%28888%29%20460-2867>(888) 460-2867
><http://www.aeonsolar.com/>www.aeonsolar.com
>
>_______________________________________________
>List sponsored by Redwood Alliance
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change listserver email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out or update participant bios:
>www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140917/c0c6ac0d/attachment-0002.html>