[RE-wrenches] DC Power Supply for powering up SMA (or similar) inverters?

Glenn Burt glenn.burt at glbcc.com
Fri Aug 15 06:17:18 PDT 2014


You might try Greg Smith at SMA.
He is one of their trainers and has used one to power up systems when traveling.

Glenn 

-----Original Message-----
From: "Ross Taylor" <wind.trainer at gmail.com>
Sent: ‎8/‎15/‎2014 8:29
To: "re-wrenches at lists.re-wrenches.org" <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] DC Power Supply for powering up SMA (or similar)	inverters?

Hi all,

Can anyone recommend a DC power supply they've used for powering up
inverters, for programming purposes?  I had a custom-made one, but it
finally bit the dust.  It was also bulky.  Size/portability is a factor.
 SMA's usually stellar tech support folks were (I guess, understandably)
reluctant to offer any guidance. 120VAC with an output in the 200-400VDC
range.  I don't have battery banks at these sites, so the only programming
options are to wait for wind (be nice!!!) or power them up this way.

I know there are a ton on-line, but I'm specifically hoping for some
personal experience and recommendation.

Thanks much!

Ross
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140815/1cb590ba/attachment-0002.html>


More information about the RE-wrenches mailing list