[RE-wrenches] Mate 3 web interface

[Jerry Shafer]

in the mate 3 guide there is a section on what you are asking


On Sat, Aug 2, 2014 at 2:06 AM, Kirk Herander <kirk at vtsolar.com> wrote:

> I want to set up a mate 3 for web monitoring. The Outback site is lacking
> in clarity of this procedure. Can anyone fill me in on any special software
> or hardware required, etc.? Thanks.
>
>
>
> *Kirk Herander*
>
> *VT Solar, LLC *
>
> *Proven PV provider since 1991*
>
> *www.vermontsolarnow.com <http://www.vermontsolarnow.com>*
>
> dba Vermont Solar Engineering
>
> NABCEPTM Inaugural Certificant
>
> VT RE Incentive Program Partner
>
> 802.863.1202
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140802/9e7375c8/attachment-0003.html>