[RE-wrenches] Split bolt
August Goers
august at luminalt.com
Wed Jun 25 11:37:17 PDT 2014
Hi William,
You might try an insulation piercing connector for this application:
https://www.platt.com/platt-electric-supply/Splicer-Reducers-Insulation-Pi
ercing/Ilsco/IPC-4-0-2-0/product.aspx?zpid=708303
Also, not to get nit-picky, but you might be in violation of the 120% rule
if that is a load side tap.
Just a couple of thoughts.
Best,
August
-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
Behalf Of William Miller
Sent: Wednesday, June 25, 2014 11:28 AM
To: RE-wrenches
Subject: [RE-wrenches] Split bolt
Friends:
For reference below is a phot of the project.
William
More information about the RE-wrenches
mailing list