[RE-wrenches] Source for wire

[Kevin Pegg]

We use this product for SF9300's:LSDSGU-9. # 10 / 2 conductor used mainly in military applications. 
 
https://www.anixter.com/north-america/ca/en/product-detail.LSDSGU-9.html
 
It's available special order through lots of wire suppliers. Never had good success getting flat tray cable to seal and stay sealed for the long haul. Haven't had issues with this wire and a few dozen installs out there. 
 
Kevin

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org]On Behalf Of Allan Sindelar
Sent: February 28, 2014 4:55 PM
To: RE-wrenches
Subject: [RE-wrenches] Source for wire


Wrenches,
Simple request, please: who carries 10/2 jacketed submersible cable, specifically to use with the Shurflo 9300 pump? 

Conventional pump suppliers don't carry it, as any pump with metal parts needs a third conductor for ground, and usually run 240V. The 9300 fits only 10/2 or 12/2 wire without ground and with flat jacketing.  It must be flat-jacketed to seal to the cable gland.

Thank you,
Allan

-- 


Allan Sindelar
 <mailto:Allan at positiveenergysolar.com> Allan at positiveenergysolar.com
NABCEP Certified PV Installation Professional
NABCEP Certified Technical Sales Professional
New Mexico EE98J Journeyman Electrician
Founder, Positive Energy, Inc.

A Certified B CorporationTM
3209 Richards Lane
Santa Fe, New Mexico 87507
505 424-1112 office 780-2738 cell
 <http://www.positiveenergysolar.com/> www.positiveenergysolar.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140301/e00344b7/attachment-0004.html>