[RE-wrenches] Midnite solar Charge controllers

Jerry Shafer jerrysgarage01 at gmail.com
Mon Feb 17 20:42:02 PST 2014


This is good to know thanks
On Feb 17, 2014 8:30 PM, "boB at midnitesolar.com" <boB at midnitesolar.com>
wrote:

>
> All CC's have their problems and MidNite has had their share, but losing
> or forgetting their programming has not
> been one of them that I'm aware of.
>
> If it is a standard Classic with MNGP display, don't forget to press ENTER
> after setting parameters so that
> the Classic remembers those settings if the DC goes off and back on again.
>
> I would give Ryan  call in tech support.  extension 151.
>
> boB
>
>
>
> On 2/17/2014 8:06 PM, Jerry Shafer wrote:
>
>  Has anyone had an issue with Midnite solar Charge controllers loosing
> programming. I have had Out back FM 80 do this and it was an software issue
> they fixed it. Now I have the same thing with midnite either that or the
> customer is messing with it and this is also a good possibility but before
> I go there I want to confirm with you all out there. The issue from Outback
> is if the CC is powered down on both sides it will loose memory, I cant
> confirm this as the customer is away and I cant get on site but we have
> Nickle Iron batteries that require high charge voltage to charge at all and
> it seams to not maintain the charge voltage setting.
>
>  Thanks
> Jerry
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140217/447da222/attachment-0004.html>


More information about the RE-wrenches mailing list