[RE-wrenches] Small pump in larger casing

[Bob-O Schultze]

No problem with the smaller pump. Can't do it the other way 'round anyway! While there is no problem with using a torque arrestor, it just isn't necessary with an SQ Flex as the pump "soft" starts.
Bob-O

On May 9, 2014, at 7:14 AM, Mac Lewis wrote:

Hello wrenches,

Is there any problem to putting a small diameter pump in a larger well casing?  Specifically, I want to put a 6 SQF-2 in a 4" casing.  I'm going to put a torque arrestor on it to help keep it from banging around.  I don't see a problem with this but haven't done many of these so I'd like to avoid any problems.

Thanks

-- 



Mac Lewis

"Yo solo sé que no sé nada." -Sócrates

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140509/6c870b97/attachment-0003.html>