[RE-wrenches] Stainless NEMA4x load center
Drake
drake.chamberlin at redwoodalliance.org
Wed Apr 23 08:11:06 PDT 2014
That would be a nice piece of hardware. Is there
any reason you can't use a NEMA 3R panel? They
are used on roofs quite a bit, and are readily
available. The Square D, 8 space, outdoor box
should work in most rooftop environments for the purpose you describe.
At 06:18 PM 4/21/2014, you wrote:
>Hello Friends!
>Anyone have a lead for NEMA 4x stainless load
>centers (electrical panel)? Â Looking for 4
>circuit version rated at about 60-100A @ 240VAC.
>Would like to use it for rooftop combiner for 3
>Enphase inverter output circuits.
>Thank you!!
>
>Sunny Regards,
>Kirpal Khalsa
>NABCEP Certified PV Installation Professional
>Renewable Energy Systems
><http://www.oregonsolarworks.com>www.oregonsolarworks.com
>541-218-0201
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140423/9ede5552/attachment-0003.html>
More information about the RE-wrenches
mailing list