[RE-wrenches] Two systems on one building with separate services

[Nathan Charles]

No, the shop service is located on the shop building.

-N


On Fri, Mar 14, 2014 at 4:52 PM, Brian Teitelbaum
<bteitelbaum at aeesolar.com>wrote:

> Are both services (and meters) on the house? Or is the shop service
> located on the shop building?
>
>
>
> Brian
>
>
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Nathan Charles
> *Sent:* Friday, March 14, 2014 1:43 PM
> *To:* RE-wrenches
> *Subject:* Re: [RE-wrenches] Two systems on one building with separate
> services
>
>
>
> The distance between the building is about 100'.
>
>
>
> The residential service is a 200A service but the workshop is 400A because
> of large of equipment and can't be combined at this point.
>
>
>
>
>
> On Fri, Mar 14, 2014 at 4:03 PM, Brian Teitelbaum <
> bteitelbaum at aeesolar.com> wrote:
>
> Nathan,
>
>
>
> What is the distance between the buildings, and where are the utility
> meters located?
>
>
>
> What are the sizes of the Services? 200A?
>
>
>
> Can both buildings be powered from a single Service? Why is the workshop
> metered separately?
>
>
>
> Brian Teitelbaum
>
> AEE Solar
>
>
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Nathan Charles
> *Sent:* Friday, March 14, 2014 12:05 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] Two systems on one building with separate
> services
>
>
>
> Hi Wrenches,
>
>
>
> I've got an issue that's got me stumped and I was hoping somebody could
> give me some suggestions.
>
>
>
> We have a customer who has two meters, one on the house and one on a
> workshop.  The workshop is heavily shaded and it's zoned residential so
> meter aggregation isn't a possibility.   The customer is hoping to put two
> separate PV systems on the house one for each meter with the inverters
> mounted in the garage.  It seems like that sets me afoul of the intentions
> of 230.2 Number of services, but if I remote one set of inverters and run
> DC I'm not quite sure how to think through the disconnecting requirements.
>
>
>
> Any advice or suggestions on if or how this might be possible?
>
>
>
> --
>
> Nathan Charles
>
> Engineer
>
> NABCEP Certified PV Installation Professional #042013-20
>
> Paradise Energy Solutions
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
>
>
> --
>
> Nathan Charles
>
> Engineer
>
> NABCEP Certified PV Installation Professional #042013-20
>
> Paradise Energy Solutions
>
> (717) 283-2021 direct
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Nathan Charles
Engineer
NABCEP Certified PV Installation Professional #042013-20
Paradise Energy Solutions
(717) 283-2021 direct
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140314/ab6554c8/attachment-0003.html>