[RE-wrenches] Outback settings for hybrid system

[Chris Mason]

I have installed an Outback GTFX3048 inverter with a 250Ah battery system.
The intent of the system is to isolate and backup a sub panel in the house
and to export excess power which will be used in the main panel loads or go
back to the grid. The inverter should not charge the batteries from the
grid and should power the loads from the grid at a battery setpoint to
avoid any deep discharge.
I find the documentation confusing on the best way to do this and we have
had some issues with getting this to work smoothly. Can anyone offer the
best settings for this application or experience with it?


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com <http://www.cometenergysystems.com>
264.235.5670
869.662.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140503/16d17846/attachment-0002.html>