[RE-wrenches] SWWP Whisper 200 - Looking for a Short to Ground

Ray Walters ray at solarray.com
Tue Oct 15 00:04:59 PDT 2013


Not familiar with a Whisper, but here's troubleshooting guide for Bergey 
with a short.  Does it have a rectifier?  That could be burned out.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 10/14/2013 8:55 PM, All Solar, Inc. wrote:
> Matt
> Sounds like you have checked everything. How about the wiring coming from the brush holder? Make sure none of them have been chaffed near the pivot.  Of course the brushes might show some arcing too if there is an intermittent short.  If you need an upper casting, complete with stator and armature, contact me off list. Also what is the resistance phase to phase of the armature?
>
> Jeremy Rodriguez
> All Solar
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
>
>> On Oct 14, 2013, at 6:38 PM, Matt Sherald <matt at getpimby.com> wrote:
>>
>> I've got a Whisper that's not performing and I'm putting this out to the group in hopes that someone has had a similiar dilemma.
>>
>> My line to line voltage measurements are the same between the three phases.  However, my line to ground measurements are consistent across only two of the phase-ground combinations.  The third phase appears to be shorting to ground.
>>
>> I had the tower down and took the machine off to check the split bolt connections at the top of the tower for wear/rubbing.  The down tower wiring checks out.  I opened the wire access on the machine to double check wire insulation and the wire nut connections.  I unbolted the slip rings and checked for any sign of a smoking gun there.  Nothing jumped out at me during the inspection and I'm curious if it might be in the spinner assembly.
>>
>> With no tech support to turn to I am hoping that someone in the Wrench community might have had a similiar conundrum at one time.  I'd appreciate hearing from you if you have.
>>
>> Many thanks in advance.
>>
>>
>>
>> Matt Sherald
>> PIMBY: Power In My BackYard
>> NABCEP Certified Solar PV Installer®
>> matt at getpimby.com
>> (304) 704-5943
>>
>> www.getpimby.blogspot.com
>> www.getpimby.com
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Slowly Spinning Bergey Excel1.pdf
Type: application/pdf
Size: 13425 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131015/2e79b687/attachment-0007.pdf>


More information about the RE-wrenches mailing list