[RE-wrenches] Teck 90

Chris Mason cometenergysystems at gmail.com
Sat Oct 12 04:11:07 PDT 2013


http://www.southwire.com/products/CSATeck90PowerCable.htm


On Wed, Oct 9, 2013 at 2:11 PM, Ray Walters <ray at solarray.com> wrote:

>  How is TEK 90 referenced in the NEC?  Does it meet the qualifications to
> be used inside an attic for instance?
> Finally the onestopbuy link was very light on info;  are the cables inside
> stranded or solid?
>
> Thanks,
>
> R.Ray Walters
> CTO, Solarray, Inc
> Nabcep Certified PV Installer,
> Licensed Master Electrician
> Solar Design Engineer303 505-8760
>
> On 10/9/2013 12:02 PM, Hilton Dier III wrote:
>
> William,
>
> We get it with two pairs of color coded #8 copper and a #10 ground. Off
> the shelf you can get #14, #12, #10, #8, and #6 and on up to 500 MCM. The
> 14-10 go up to 10 conductors and the 8 and 6 go up to 4 conductors.
>  Here's a URL, not the cheapest place, but to give you an idea:
> http://www.onestopbuy.com/wire-cable/Product-Price-Code-TK-40629.aspGraybar had the best price for us.
>
> You can also get it custom in big quantities from some manufacturers.
>
> If you support it every 18" or so it stays straight. The end connectors
> are a bit of a PITA to assemble. The key is to cut the end of the armor
> cleanly and as directed and then disassemble the connector and put it on
> piece by piece. Takes a couple of minutes.
>
> Hilton
>
> --
> Hilton Dier III
> Renewable Energy Design
> Partner, Solar Gain LLC
> 453 East Hill Rd.
> Middlesex, VT 05602
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:www.members.re-wrenches.org
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com
Cell: 264.235.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131012/93f5dc33/attachment-0004.html>


More information about the RE-wrenches mailing list