[RE-wrenches] Teck 90

Ray Walters ray at solarray.com
Wed Oct 9 11:11:25 PDT 2013


How is TEK 90 referenced in the NEC? Does it meet the qualifications to 
be used inside an attic for instance?
Finally the onestopbuy link was very light on info;  are the cables 
inside stranded or solid?

Thanks,

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 10/9/2013 12:02 PM, Hilton Dier III wrote:
> William,
>
> We get it with two pairs of color coded #8 copper and a #10 ground. 
> Off the shelf you can get #14, #12, #10, #8, and #6 and on up to 500 
> MCM. The 14-10 go up to 10 conductors and the 8 and 6 go up to 4 
> conductors.
>  Here's a URL, not the cheapest place, but to give you an idea: 
> http://www.onestopbuy.com/wire-cable/Product-Price-Code-TK-40629.asp 
> Graybar had the best price for us.
>
> You can also get it custom in big quantities from some manufacturers.
>
> If you support it every 18" or so it stays straight. The end 
> connectors are a bit of a PITA to assemble. The key is to cut the end 
> of the armor cleanly and as directed and then disassemble the 
> connector and put it on piece by piece. Takes a couple of minutes.
>
> Hilton
> -- 
> Hilton Dier III
> Renewable Energy Design
> Partner, Solar Gain LLC
> 453 East Hill Rd.
> Middlesex, VT 05602
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131009/1853c7a4/attachment-0003.html>


More information about the RE-wrenches mailing list