[RE-wrenches] Eaton bolt on panel modifications

[Chris Mason]

Check on Ebay, people often sell excess parts for panels.


On Fri, Oct 4, 2013 at 2:12 AM, William Miller <william at millersolar.com>wrote:

> Friends:****
>
> ** **
>
> I need to modify an Eaton 400 amp panelboard for an industrial off-grid
> system.  I need 3 150 amp 2 pole breakers and a few of the clips used to
> connect the bolt-on breakers to the busses (“Provisions,” they are called).
> ****
>
> ** **
>
> I was informed by the Eaton rep that the cost to replace the entire
> interior of the panelboard was cheaper than buying a few clips.  It was
> explained that buying “loose parts” was more expensive than buying an
> entire bus system.  I just cannot believe this.  ****
>
> ** **
>
> Has anyone purchased the clips for Eaton before?  Know a good Eaton dealer?
> ****
>
> ** **
>
> Thanks in advance.****
>
> ** **
>
> William Miller****
>
> ** **
>
> ** **
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com
Cell: 264.235.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131004/c8285477/attachment-0004.html>