[RE-wrenches] Stainless Steel Cable Ties

Chris Anderson canderson at borregosolar.com
Thu Jun 6 06:42:46 PDT 2013


Chris
That is a good tie from HT. I think your part number is off however. The
spec is PA66HIRHSUV. They have them in 50lb and 120lb capacity and in
varying lengths. These have a good life expectancy in arid climates.  You
can even get something in writing from HT. We have been able to procure a
warranty to back up their life expectancy claims. When in contact with galv
steel racking and in humid climates, life expectancy declines significantly
with the PA66HIRHSUV.
Consider their Acetal cable ties for this situation. Again backed by HT.

Also ties used inside combiners and other gear should be rated for the
higher temps in these boxes. HT has a PA66HS tie that is designed for the
higher temps.

They don't sell direct, but lots of distributors our there.

Contact at HT -

Brian L. Ray****

HellermannTyton****

Market Development Manager-Renewable Energies****

(256)457-8638****

Bray at htamericas.com


Contact at a good distributor - Heilind -

*Mark Ferris*
Supplier Advocate – Eastern Region
58 Jonspin Road
Wilmington , MA 01887

Office: 978-988-3375

**

Mobile : 978-375-4596

www.heilind.com

www.heilind.com



Some people are down on ties, but do your research and get a good one and
they can last the life of a PV system. HT has a lot of good testing reports
to that can substantiate their claims.

Chris Anderson


On Wed, Jun 5, 2013 at 7:58 PM, Chris Mason <cometenergysystems at gmail.com>wrote:

> Following up on this question of whether Cable Ties are going to last in
> high UV situations, I happened to get a sample of some HellermanTyton solar
> cable ties with edge clips. I also got the catalogue, and found that there
> are many different material options for Cable Ties. The ones intended for
> PV work are "Polyamide 6.6 impact modified, heat stabilized, UV resistant
> (PA66HIRHS)" which infers a much better UV resistance.
>
> http://www.hellermanntyton.us/productDetail.aspx?lon=156-00635&ref=search.aspx
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 

Regards,

Chris Anderson
Chief Technology Officer
Borrego Solar Systems
1115 Westford Street, 2nd floor
Lowell, MA  01851
M: 603-732-2411
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130606/7f829434/attachment-0004.html>


More information about the RE-wrenches mailing list