[RE-wrenches] would this work?
Larry Crutcher, Starlight Solar Power Systems
larry at starlightsolar.com
Wed Jun 5 19:43:57 PDT 2013
All MPPT controllers I know of all need battery voltage to operate.
Larry Crutcher
On Jun 5, 2013, at 9:30 PM, toddcory at finestplanet.com wrote:
ok wrenches... here is a hair brained idea i came up with.
i have this customer with the grundfos pump being powered, array direct by 10 astropower 75's in series... so around 170 vdc.
what would happen if a hv mppt charge controller were paralleled with the panel output feeding the pump?
would the cu200 & charge controller mppt algorithms fight each other?
thanks,
todd
Sent from Finest Planet WebMail.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130605/3e621d36/attachment-0004.html>
More information about the RE-wrenches
mailing list