[RE-wrenches] Enphase Wire Management

William Miller william at millersolar.com
Thu Apr 11 21:50:06 PDT 2013


Aaron:

We use a system with slotted PVC conduit.  Got the basic idea from a 
wrench, don't remember who, but thanks.  There are photos on our web 
site.  Worked on a project today and the system is slowly evolving.

William



At 05:52 PM 4/11/2013, you wrote:
>Just wondering what people like to use for supporting the trunk cable for 
>the enphase 215 inverters.  WIth zipties going brittle after a couple of 
>years aluminum or steel options are what I am more interested in.  I have 
>seen some installs with steel zipties but the sharp edge on them makes me 
>wonder if there is a chance of them cutting into the cable.   I have used 
>3/8" one hole conduit straps on each side of the trunk cable connector and 
>although this seems quite stout it gets expensive on larger systems.  Any 
>ideas about products out there for supporting the trunk cable for the life 
>of the system?
>
>Aaron Mandelkorn
>NABCEP Certified PV Installer
>Renewable Energy Outfitters
>Box 65 Salida, CO. 81201
>(970)596-3744
><mailto:reosolar at gmail.com>reosolar at gmail.com
>www.reosolar.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2013.0.2904 / Virus Database: 2641/6237 - Release Date: 04/10/13

Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130411/ab8e8193/attachment-0004.html>


More information about the RE-wrenches mailing list