[RE-wrenches] Enphase Wire Management

[Jason Szumlanski]

Rubberized clamps that fit in the rail channel from PV Racking. $75 for
300. Buy from manufacturer.


*Jason Szumlanski** *

*Fafco Solar* <http://www.wisestamp.com/apps/wordpress?utm_source=extension&utm_medium=email&utm_term=wordpress&utm_campaign=apps>



On Thu, Apr 11, 2013 at 8:52 PM, Aaron Mandelkorn <reosolar at gmail.com>wrote:

> Just wondering what people like to use for supporting the trunk cable for
> the enphase 215 inverters.  WIth zipties going brittle after a couple of
> years aluminum or steel options are what I am more interested in.  I have
> seen some installs with steel zipties but the sharp edge on them makes me
> wonder if there is a chance of them cutting into the cable.   I have used
> 3/8" one hole conduit straps on each side of the trunk cable connector and
> although this seems quite stout it gets expensive on larger systems.  Any
> ideas about products out there for supporting the trunk cable for the life
> of the system?
>
>        Aaron Mandelkorn
> NABCEP Certified PV Installer
> Renewable Energy Outfitters
> Box 65 Salida, CO. 81201
> (970)596-3744
>      reosolar at gmail.com
> www.reosolar.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130412/3228546b/attachment-0003.html>