[RE-wrenches] Two Mates

toddcory at finestplanet.com toddcory at finestplanet.com
Wed Apr 10 14:07:06 PDT 2013


this might help too:

[http://www.geek2seek.com/qvs-2-port-cat-5-rj45-premium-manual-switch-ca284e2s.aspx?gclid=CJu1gtGAwbYCFYFxQgod3G0ATg] http://www.geek2seek.com/qvs-2-port-cat-5-rj45-premium-manual-switch-ca284e2s.aspx?gclid=CJu1gtGAwbYCFYFxQgod3G0ATg
 
todd
 
 
 
On Wednesday, April 10, 2013 1:33pm, "Benn Kilburn - DayStar Renewable Energy" <benn at daystarsolar.ca> said:





If you want to utilize a mate at the equipment and one 300' away why not just have a mate in both locations and always keep the remote one plugged in, unless you are in front of the equipment, then just plug that one in.  When you turn off the lights to leave just make sure you plug the remote mate back in.
It would require some interface and maybe a instruction label or two, but is doable, no?  Or would it not work because of memory, settings or other limiting factors?
benn


DayStar Renewable Energy Inc. 

www.daystarsolar.ca
780-906-7807 

Construction Electrician Solar PV Systems Certified
Certificate # 0007S
HAVE A SUNNY DAY
From:  frenergy <[mailto:frenergy at psln.com] frenergy at psln.com>
Reply-To:  RE-wrenches <[mailto:re-wrenches at lists.re-wrenches.org] re-wrenches at lists.re-wrenches.org>
Date:  Sunday, April 7, 2013 10:10 PM
To:  RE-wrenches <[mailto:re-wrenches at lists.re-wrenches.org] re-wrenches at lists.re-wrenches.org>
Subject:  [RE-wrenches] Two Mates


Bob-O, et al.

Thanks for the help...I guess I  always thoughts 2 Mates were do-able, now I see it's even labeled on the second  port of a hub "2nd Mate".  But alas, from your feed back, I'll not be  utilizing another Mate in this (or any) system.  Dang.

Bill
Feather River Solar Electric


----- Original Message -----
From: [mailto:dana at solarwork.com] Dana
To: [mailto:re-wrenches at lists.re-wrenches.org] 'RE-wrenches'
Sent: Saturday, April 06, 2013 3:34    PM
Subject: Re: [RE-wrenches] Two  Mates

Ditto    the second port will not work according to a conversation with OB a while    back.
 

____________________________________________________________________________
Dana    Orzel 
Great    Solar Works, Inc - NABCEP    # 051112-136
[mailto:dana at solarwork.com] dana at solarwork.com - [http://www.solarwork.com] www.solarwork.com 
O - 970.626.5253    F - 970.626.4140   C -    970.209.4076 
"Responsible    Technologies for Responsible People since 1988"  
 
 


From: [mailto:re-wrenches-bounces at lists.re-wrenches.org] re-wrenches-bounces at lists.re-wrenches.org [[mailto:re-wrenches-bounces at lists.re-wrenches.org] mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Bob-O    Schultze
Sent: Saturday, April 06, 2013 4:32 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Two    Mates
 
I don't know about the Mate3, but I could never get two    Mates to work on a Hub-4 or Hub-10. Yes, there are two spaces for Mates on a    Hub 10, but according to one of the techies I spoke to, it was a good idea    that never happened.

Bob-O

 


On Apr 6, 2013, at 12:01 PM, frenergy    wrote:


 


Wrenches,

 

 I need a little Weekend Wrench assistance.  I can't    find anything definitive in the Mate3 OM discussing how many Mates can be    connected to a Radian.  I have a backhoe showing up Monday AM.  I am    running power and cat5 for a Mate3 from a Radian to a location 300'    away. 

 

Two things:    This is the max recommended for the hub-to-a-mate distance so I'm planning on    pulling it in its own conduit, separate from the power (do other tricks come    to mind to insure the signal makes it?), and

Can I connect    this Mate3 and keep the one at the Radian online?  Has anybody actually    done this?

 

Thanks, as    always,

 

Bill

<FRS_working_logo.jpg>


 _______________________________________________ List sponsored by Home Power magazine  List Address: [mailto:RE-wrenches at lists.re-wrenches.org] RE-wrenches at lists.re-wrenches.org Change email address & settings: [http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: [http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm  Check out participant bios: www.members.re-wrenches.org 


Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130410/ac9bca3d/attachment-0004.html>


More information about the RE-wrenches mailing list