[RE-wrenches] Soladeck Alternatives

[Troy Harvey]

The zilla flashing looks perfect. Thanks!


thanks,

Troy Harvey
---------------------
Principal Engineer
Heliocentric
801-453-9434
taharvey at heliocentric.org



On Mar 25, 2013, at 1:37 PM, Aaron Mandelkorn <reosolar at gmail.com> wrote:

> I believe that Zilla and Quick Mount makes flashed options for conduit entry through the roof. You will still have to use a SLB but they are much lower profile than the Oaty flashings used in the past and should fit under thin framed modules.  
> 
> 
> 
> Aaron Mandelkorn
> NABCEP Certified PV Installer
> Renewable Energy Outfitters
> Box 65 Salida, CO. 81201
> (970)596-3744
> reosolar at gmail.com
> www.reosolar.com
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> On Mar 25, 2013, at 1:28 PM, Troy Harvey wrote:
> 
>> We typically bring the electrical up through the roof under the array for best aesthetics. We have been using SLBs and plumbing style flashing for years with good results.
>> 
>> However, in recent times the panel frames have been leaning towards thinner frames. The result is that the plumbing flashing is being turned inside out because it has less room, so we have been potting it with sealant - which is not ideal. I've been looking at the soladeck, but they are too large and expensive for a junction box (not combiner) use. Any other smaller, less expensive alternatives others have come across?
>> 
>> 
>> thanks,
>> 
>> Troy Harvey
>> ---------------------
>> Principal Engineer
>> Heliocentric
>> 801-453-9434
>> taharvey at heliocentric.org
>> 
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130325/571b0425/attachment-0004.html>