[RE-wrenches] XW generator control for thermostat

Jay Peltz jay at asis.com
Fri Mar 22 16:07:08 PDT 2013


Hi jeff

You should check with xantrex.  
I'm thinking its one of the units not being the right version of firmware. 
At least I've seen this type problem before. 

Jay

Peltz power



Sent from my iPhone

On Mar 22, 2013, at 1:23 PM, "Jeff Yago" <jryago at dtisolar.com> wrote:

> We have an Xantrex XW 6048 inverter we installed for a client about 2 years ago that includes the separate generator  control module, which currently programmed to start the generator on low battery.  The client has gone through several  outages when he was not home.  The solar/battery/inverter system worked too good so the battery charge never dropped low enough to start the generator, so the heat never came on.  His heat will never run during a winter outage unless the generator is started.
>  
> I know the XW generator control module has a specific control input dedicated (yellow & gray spares) for a remote thermostat that will trigger the generator to run if the thermostat calls for heat.  I also changed the  program switch enable the thermostat input function (default is off).  However, this feature does not work.  We even shorted the control wires right at the generator control module but the generator will not remote start except using the remote display manual off/auto/run program toggle, which at least shows this generator control module does work.
>  
> The installation manual states it will start the generator on a “signal” from a wall thermostat.  Does this mean we need a voltage and not a dry contact? 
>  
> Any suggestions??
>  
> Thanks,
>  
> Jeff Yago
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130322/de61480d/attachment-0004.html>


More information about the RE-wrenches mailing list