[RE-wrenches] 14 inch aluminum standoffs?

[Jesse Dahl]

I've used hot dipped galvanized 4" x 4" square tube for the "backbone" (lack of a better term) of a pole mount on a dual axis tracker. I worked on it with Darryl Thayer so maybe he could add more info...

Jesse 

Sent from my iPhone

On Mar 15, 2013, at 4:11 PM, William Miller <william at millersolar.com> wrote:

> Andrew:
> 
> DPW has aluminum stand-offs at least 12", and quite possibly 14".  They are custom order.  They are good quality.
> 
> William Miller
> 
> 
> 
> At 01:52 PM 3/15/2013, you wrote:
>>  
>> Fold Two:  Does anyone know of a source for 'standoffs' that are greater than 7"s but less than say 20"?
>>  
>> Sincerely,
>>  
>>  
>> Andrew Koyaanisqatsi
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130315/d964b377/attachment-0004.html>