[RE-wrenches] Hawaii Frequency Settings

John Berdner John.Berdner at solaredge.com
Mon Feb 4 18:07:39 PST 2013


Mark:

Yes, Hawaii requires custom settings and they require the installer to certify the inverter has been programmed to those settings.
We have a menu choice for Hawaii in our setup menus.
If you have older product we can update them remotely once connected to the internet.

Best Regards,

John Berdner
General Manager, North America

[cid:image001.jpg at 01CE0302.850C5940]

SolarEdge Technologies, Inc.
3347 Gateway Boulevard, Fremont CA 94538 USA  (*Please note of our new address.)
T: 510.498.3200, X 747
M: 530.277.4894

From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Mark Frye
Sent: Monday, February 04, 2013 3:44 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Hawaii Frequency Settings

Folks,

I was told that because the HI grid has poor frequency control, grid-tied inverters have to have their low frequency limit set to 57 Hz so they can ride out the worst low frequency events.

I find it hard to believe that this has been done for every single inverter installed in HI.

But, what do I know.

Can anyone shed some light on this?

Thanks,

Mark Frye
Berkeley Solar Electric Systems
CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for the use of the individual or entity who is the intended recipient and may contain information that is privileged, confidential and exempt from disclosure or any type of use under applicable law. If the reader of this e-mail is not the intended recipient, or the employee, agent, or representative responsible for delivering the e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this e-mail is strictly prohibited. If you have received this e-mail in error, please reply immediately to the sender.
P  Please think of the environment before printing this email
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130205/185d59db/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 13992 bytes
Desc: image001.jpg
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130205/185d59db/attachment-0007.jpg>


More information about the RE-wrenches mailing list