[RE-wrenches] Square D Disconnects mounted on the slope of the roof.

[Mark Drummond]

15 degrees off of vertical is my understanding for standard RBs. So no,
can't do that. Cheers good friend.
On Nov 7, 2013 2:42 PM, "Kirpal Khalsa" <solarworks at gmail.com> wrote:

>
> Hi Folks!!!
> Anyone aware of minimum slope requirements for Square D 321RB
> disconnects....Can they be mounted on rails parallel to the slope of the
> roof like Outback and Midnite solar combiner boxes(down to a 3/12 pitch)
> I can't seem to find any notes stating the limitations in manufacturer
> documentation...... They are NEMA 3 of course....
> Thanks in advance for any direction you can provide....
>
> Sunny Regards,
> Kirpal Khalsa
> NABCEP Certified PV Installation Professional
> Renewable Energy Systems
> www.oregonsolarworks.com
> 541-218-0201 m
> 541-592-3958 o
>
>
>
>>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131107/a4a04468/attachment-0003.html>