[RE-wrenches] Security on a ground mount?
William Dorsett
wmdorsett at sbcglobal.net
Sun Oct 27 11:37:57 PDT 2013
Bob-O, hard to unscrew a rivet.that's a very good suggestion. You would see
these holding the modules to bottom clamps instead of bolts? I suspect
others on the list have similar problems.
Thanks
Bill Dorsett
Manhattan, KS
(Native word for "the place of great drunkenness") : )
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Bob-O
Schultze
Sent: Sunday, October 27, 2013 12:35 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Security on a ground mount?
1/4" stainless steel pop rivets are pretty effective. Cost about $1 each and
the tool is about $100. Useful for other large rivets as well. You would
need a grinder to get them off.
Bob-O
On Oct 24, 2013, at 1:37 PM, William Dorsett wrote:
We've got a system to go up in the student ghetto in the middle of town, so
of course we got drunks and little pirates. Height has always been a
solution but requires a lot beefier (pronounced "expensive") support pipes.
What security measures does everyone recommend of a system that is low
enough to unbolt? Thanks all.
<image002.jpg>
<Bill Dorsett.vcf>_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131027/563288fb/attachment-0003.html>
More information about the RE-wrenches
mailing list