[RE-wrenches] Security on a ground mount?

[Bob-O Schultze]

1/4" stainless steel pop rivets are pretty effective. Cost about $1 each and the tool is about $100. Useful for other large rivets as well. You would need a grinder to get them off.
Bob-O

On Oct 24, 2013, at 1:37 PM, William Dorsett wrote:

We’ve got a system to go up in the student ghetto in the middle of town, so of course we got drunks and little pirates. Height has always been a solution but requires a lot beefier (pronounced “expensive”) support pipes. What security measures does everyone recommend of a system that is low enough to unbolt? Thanks all.
 
 
<image002.jpg>
 
<Bill Dorsett.vcf>_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131027/3602ef89/attachment-0003.html>