[RE-wrenches] would this work?

jay peltz jay at asis.com
Wed Jun 5 20:18:42 PDT 2013


Hi Todd

As bob-0 and Larry have said

And the sqflex is a mppt unit, nothing else needed

Jay

Peltz power

Sent from my iPad

On Jun 5, 2013, at 7:30 PM, toddcory at finestplanet.com wrote:

> ok wrenches... here is a hair brained idea i came up with.
>  
> i have this customer with the grundfos pump being powered, array direct by 10 astropower 75's in series... so around  170 vdc.
>  
> what would happen if a hv mppt charge controller were paralleled with the panel output feeding the pump?
> would the cu200 & charge controller mppt algorithms fight each other?
>  
> thanks,
>  
> todd
> 
> 
> 
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130605/b638496a/attachment-0003.html>


More information about the RE-wrenches mailing list