[RE-wrenches] FM80
Jesse Dahl
dahlsolar at gmail.com
Tue May 28 21:01:35 PDT 2013
When I was looking at the Outback Flexone setup today during some down time I notice that they send that package out with an 80A PV breaker and an 80A GFDI breaker. If a person had an array up at 2500W and a 24V battery bank, on some occasions, wouldn't this lead to tripping of the 80A breaker on the output side of the charge controller?
2500W/24V (just for math sakes)=104A
Jesse
Sent from my iPhone
On May 28, 2013, at 10:10 AM, "SunHarvest" <eric at harvesthesun.com> wrote:
> Jesse,
>
> I have an FM80 on an array of 2560 STC; all off-grid. The only issue I have is that when my batteries are full, and I have essentially zero loads, and the sun is shining away, my XW will disconnect and my house will lose power. I have to reset the system to get back online. This, I'm pretty sure is not a malfunction of the FM80, but rather an issue with the XW, just haven't had time yet to fully trouble-shoot. I think it's a matter of reconfiguring the XW charging setpoints. I haven't had any direct issues with the FM80 with this STC "over power" set up.
>
> Eric
> SunHarvest
> (530)98-3738
>
> ----- Original Message ----- From: "Jesse Dahl" <dahlsolar at gmail.com>
> To: "Wrenches" <RE-wrenches at lists.re-wrenches.org>
> Sent: Friday, May 24, 2013 8:06 PM
> Subject: [RE-wrenches] FM80
>
>
>> Hello,
>>
>> I'm working on bid for a system using the FM80 controller. The specs for the controller say the maximum STC wattage for a 24V system is 2500W. The array I want to use has a STC wattage 2550. I called outback to ask if this was "close enough" today and didn't get a reply (holiday weekend?!) I also called the distributor I buy my parts through and they said it wouldn't be a problem.
>>
>> I don't want to lose warranty of something happens. I don't want to use different modules. I don't want to have to add another controller and split up the array just for 50W.
>>
>> Thoughts?
>>
>>
>> Have a good holiday weekend!
>>
>> Jesse
>>
>> Sent from my iPhone
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list