[RE-wrenches] TR Inverter Problems

[Jonathan Hill]

I gotta agree with Bobbo on this one. What a hunk of garbage! It has about a 50% failure rate in my experience. I guess that means you've got a 50-50 chance of not having a problem though!
Jon Hill
solarjon at gmail.com
530-559-3781

On Apr 30, 2013, at 4:54 PM, Bob-O Schultze <bob-o at electronconnection.com> wrote:

> The TR is a classic example of what I call 3C. Cheap Chinese Crap. If Xantrex had any ethics at all they would have killed that line and refunded everyone's dough years ago.
> Bob-O
> 
> On Apr 30, 2013, at 3:44 PM, Kent Osterberg wrote:
> 
> Ray,
> 
> I've got a customer that has the same problem with a dual TR inverter system. When we first complained, Xantrex promised they were working on a fix. That never materialized and now the TR is out of production. It's a lousy product and customer service has been the same. A few months ago, I was asked to participate in a survey regarding Xantrex products and service. My responses must have got someone's attention because I got a follow-up call about the survey. There never has been a follow-up to correct this customer's problem inverter.
> 
> Kent Osterberg
> Blue Mountain Solar, Inc.
> www.bluemountainsolar.com
> t: 541-568-4882
> 
> On 4/30/2013 3:19 PM, Ray Walters wrote:
>> Hi Folks:
>> 
>> I just finished up another ugly rewire project for a customer that had another"installer" put in a Xantrex TR inverter.
>> We fixed numerous wiring issues, including neutral bonded to ground in 7 different places!
>> The issue we're having now though, is that the TR inverter output voltage fluctuates when running CF lighting, and the refrigerator.
>> You can literally see the lights cycling brighter and dimmer, and hear the compressor on the fridge running up and down in frequency. Xantrex/ Schneider Tech support said that:
>> A) The TR doesn't do well with CF lighting, and that we should switch to all incandescent........ hmmmm.
>> B)  We should set the search watts to zero (which I already did)
>> C) We need to increase the loads on the TR, as it doesn't regulate output voltage and frequency very well at lower loads........ 2nd big hmmmmm.
>> 
>> I knew there was a reason I quit installing Xantrex inverters about 5 years ago, but I couldn't recall the details.  Now its all coming back to my feeble, aging brain.  So aside from switching out the inverter , (which I just installed on a beautiful Midnite E-Panel) does anybody have any cures for our ills?  How would LED lighting behave?  Should I throw a capacitor across the output? or perhaps I should just retire early and sail around the Caribbean? (I can afford a canoe/ no sail......)
>> 
>> As always, thanks in advance for this wonderful technical (and emotional) support group,
>> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130501/6bc9ac2e/attachment-0003.html>