[RE-wrenches] Modules approved for horizontal mounting

[Benn At DayStarSolar]

Carl,
Each specific module install instruction guide should state the acceptable mounting attachment points. 

benn
Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts and typos. 

On 2013-04-19, at 7:27 PM, Carl Adams <swingjunkie at gmail.com> wrote:

> Hello wrenches,
> 
> I have a request for quote,  which shows modules mounted horizontally on a supporting structure.  This is being done more for show than production obviously.  The approved modules in the bid spec are Sharp, Renesolar, LDK, and Trina.
> 
> Does anyone know if these modules are approved, by the manufacturer, for flat (horizontal) mounting, or have a good point of contact with any of these manufacturers so I can get a quick answer direct from them?  We have a 20 psf design snow load in our area.
> 
> Cheers
> Carl Adams
> SunRock Solar
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130419/638c2984/attachment-0003.html>