[RE-wrenches] outback fx series inverters

[boB]

Todd, I know that you didn't say that the customer was getting 
headaches, but maybe that is what is making him/her sick ?

If so, then may I suggest that what is causing the problem is, instead 
of EMF, (which I am highly skeptical of),
that it may be that the customer is getting sick from the high frequency 
sound emanating from the inverters.
It's high, but may still be in the range of hearing for some people.

You might see if this customer can hear or detect up to around 20 kHz ?  
Some people, especially
the younger and some sensitive older people can hear pretty high.

Just a suggestion.

Also, if it is "EMF" that is a problem, then make sure they don't ever 
go out into the sun !
That's around 1000 watts per square meter of ionizing electromagnetic 
radiation !!
It'll cause cancer and burn your skin !

boB



On 4/13/2013 3:58 PM, jay peltz wrote:
> Hi guys,
>
> While I agree that its probably crazy talk.
>
> There is one story I have to share.
>
> Just like this one, the customer was complaining of the emf's.
> then she called the install company to say that they were gone!.
> She didn't know that just that morning the install guys had put a 
> faraday cage around the inverter, put in extra grounds etc.
>
> No way she could have known, but she did notice the difference.
>
> So don't discount everyone, just almost everyone.
>
> jay
>
> peltz power
>
> On Apr 13, 2013, at 1:09 PM, Chris Daum wrote:
>
>> I don't know....I have perhaps three customers, over the past ~20 
>> years, who claim to be 'allergic to electricity', for lack of a 
>> better term.  As you can imagine, existing in our current society is 
>> actually painful for them. They've all bought (for example) propane 
>> 'fridges since they use no electricity and don't cause them to have 
>> that 'pins & needles' feeling they get when they are near electrical 
>> fields.  I try not to laugh at them, yet I believe they are sincere 
>> when they tell me, "I can't stand to be near anything electrical".  
>> So perhaps there needs to be some sort of independent test to confirm 
>> what these folks /claim/ to feel.
>> Chris Daum
>> Oasis Montana Inc.
>>
>> ------------------------------------------------------------------------
>> *From:* re-wrenches-bounces at lists.re-wrenches.org 
>> <mailto:re-wrenches-bounces at lists.re-wrenches.org> 
>> [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of 
>> *Randy Brooks
>> *Sent:* Saturday, April 13, 2013 1:53 PM
>> *To:* RE-wrenches
>> *Subject:* Re: [RE-wrenches] outback fx series inverters
>>
>> Have you used a gaus meter 
>> (http://www.amazon.com/Gen-El-Gauss-Master/dp/B0004IR6J6/ref=sr_1_2?ie=UTF8&qid=1365882645&sr=8-2&keywords=gaus+meter) 
>> to measure the EMF near the inverters and other places?  Might put it 
>> in perspective.
>>
>> Randy
>>
>> On Apr 13, 2013, at 12:17 PM, Todd Cory <toddcory at finestplanet.com 
>> <mailto:toddcory at finestplanet.com>> wrote:
>>
>>> wrenches...
>>>
>>> put on our tin foil hats... i have a customer who claims the emf 
>>> from their grid tied gvfx3648 is making them sick. does anyone know 
>>> the switching frequency of the inverter and has anyone else reported 
>>> this? also any ideas on how to mitigate it?
>>>
>>> thanks,
>>>
>>> todd
>> ____________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130413/1469d6d7/attachment-0003.html>