[RE-wrenches] Cable tray

[Chris Mason]

What part of 392 would be a problem?

On Mon, Mar 25, 2013 at 6:12 PM, Glenn Burt <glenn.burt at glbcc.com> wrote:

> I think you will find it difficult to adhere to Article 392 and use a
> cable tray on a rooftop with source circuit conductors, if that is your
> hope.****
>
> ** **
>
> -Glenn****
>
> ** **
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Chris Mason
> *Sent:* Friday, March 22, 2013 3:08 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] Cable tray****
>
> ** **
>
> I'm looking for flat roof cable tray system that is cost effective. We
> previously used Cablofil and Cablo-port FSL 12" tray but it is very
> expensive for our current application due to the size of the roof. We need
> to install about 200' of tray and Cablofil galvanized is eating up the
> budget. Can anyone recommend a cheaper alternative.
> ****
>
> ** **
>
> --
> Chris Mason****
>
> ** **
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com
Cell: 264.235.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130325/8b9ce0f0/attachment-0003.html>