[RE-wrenches] Clipping

Jesse Dahl dahlsolar at gmail.com
Fri Mar 22 14:23:58 PDT 2013


Understood. I guess the point/question was, a 250W module with a 215W micro would "flat top" a heck of a lot of power where I live during the 6 months of winter we have. I've sized my system to account for increased production during this time. I guess it comes down to sizing. I find it hard to do the 250W to 215W systems seeing what my system does on a regular basis. I'd like to see hard numbers from an enphase system showing the gains on the knee of the curve compared to "flat topping". 

Jesse

Sent from my iPhone

On Mar 22, 2013, at 1:11 AM, Nick Soleil <nsoleil at enphaseenergy.com> wrote:

> Hi Jesse and Wrenches,
> 
> One thing that should be understood about the production readings from a DC optimizer system is that the module level readings are in DC.  That is the production before being converted to AC, and does not account for the losses of the inverter.  It isn't really an apples to apples comparison to equate that production reading to the 225watt max output of the Enphase M215.
> 
> 
> On Thu, Mar 21, 2013 at 8:24 PM, Jesse Dahl <dahlsolar at gmail.com> wrote:
>> Hello,
>> 
>> Marco's email about Power-1's micros reminded me to send this screen shot.
>> 
>> This is from my system at home.  It consists of 9 210W Kyocera modules, Tigo optimizers and a 2kW PV Powered inverter.  It was very cold and clear on this day, but every sunny day this winter I've seen numbers similar to this at some point each day. I was trying to keep track of the amount of power over the STC rating of the modules, but its getting to be a huge project. I have hours each day that produce over the 210W.
>> 
>> 
>> Here is the link to my system. It shows each modules temp, Vdc, Adc and power.   I don't have the irradiance meter because of cost.
>> 
>> http://www.tigoenergy.com/site.php?181428c8-1402
>> 
>> Jesse
>> 
>> 
>> 
>> 
>> 
>> Sent from my iPhone
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
> 
> 
> 
> -- 
> Cordially,
> Nick Soleil
> Field Applications Engineer
> Enphase Energy
> Mobile: (707) 321-2937
> 
> Enphase Commercial Solar. Limitless.
> 
> 1420 North McDowell
> Petaluma, CA 94954
> www.enphase.com
> P: (707) 763-4784 x7267
> F: (707) 763-0784
> E: nsoleil at enphaseenergy.com
> <image002.jpg> Certified Solar PV Installer #03262011-300
> 
> “Don’t get me wrong: I love nuclear energy! It’s just that I prefer fusion to fission. And it just so happens that there’s an enormous fusion reactor safely banked a few million miles from us. It delivers more than we could ever use in just about 8 minutes. And it’s wireless! .”  
> 
> - William McDonough
> 
> 
> This email message is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. If you are not an intended recipient, you may not review, use, copy, disclose or distribute this message. If you received this message in error, please contact the sender by reply email and destroy all copies of the original message. 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130322/8ec5be37/attachment-0003.html>


More information about the RE-wrenches mailing list