[RE-wrenches] wrenches] Husqvarna 5500 and VFX3524Compatibilityquestion

[jay peltz]

Hi Carl,

thanks and yes, I think its why they only did a 120v version here.

Another question for you there.

Its my understanding that neither of your legs is bonded to ground correct?



jay

peltz power


On Feb 3, 2013, at 4:22 PM, Carl Emerson wrote:

> Hi Jay,
>  
> Yes you have described our grid waveform correctly.
>  
> It is strange to me that they call yours 240V, the rationale used to describe yours and mine are different I guess.
>  
> Your grid seems to present less volts and more current.
>  
> If this is correct then I am guessing that the transformers used in the units here will not work for you.
>  
> Regards
> Carl Emerson
>  
>  
> Hi Carl,
>  
> Your 230vac is a single wave form right?
>  RMS peak to zero crossing of 230v
>  
> vs our
>  
> 240vac which is 2 phase wave form
> RMS peak to zero crossing of 120v 
>  
> Have I got this right?
>  
> thanks,
> jay
>  
> peltz power
>  
>  
>  
>  
> On Feb 2, 2013, at 6:56 PM, boB wrote:
> 
> 
> 
> Carl,   NZ is 240 VAC right ?   240 VAC 2 wire ?
> 
> I think that the problem may have to do with leg to leg voltage cross regulation
> imbalance in 120/240 3 wire systems.
> 
> boB
> 
> 
> On 2/2/2013 3:23 PM, Carl Emerson wrote:
>> Goodness knows why 240V Sunny Island’s are unavailable in the US…
>>  
>> We have been installing these in NZ for years !!!
>>  
>> Regards
>> Carl Emerson
>>  
>>  
> 
>  
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130203/673c68b0/attachment-0003.html>