[RE-wrenches] Microinverters with S-5-PV

[Jason Szumlanski]

Does anyone see a problem (NEC/UL/physical) with mounting microinverters to
S-5 Mini clamps and mounting PV on S-5-PV Kits? The trunk cable could be
supported with clips on the module frames. Wire management could become a
bit difficult, but doable.

This would be a pretty cost effective mounting method compared to rail
mounting, I think. The micro would not have much of a base to sit upon, but
maybe a fender washer between the clamp and the microinverter would be fine.

Has anyone done this?

Obviously AC modules work great in this scenario, but that's not always
what the customer wants...

Jason Szumlanski
Fafco Solar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131126/a9d98d18/attachment-0002.html>