[RE-wrenches] Safely inducing arc fault and ground fault in a completed array

[Carl Adams]

Wrenches,

We just completed an install with the SMA STP12000TL-US.  I would like to
induce two fault conditions into the system 1) ground fault, and 2) arc
fault, in a manner that is both safe to equipment and personnel, in order
to see how these units respond to those conditions, and in particular how
the arc fault is cleared, after detection. (assuming it is detected)

Any suggestions appreciated.

With Regards
Carl Adams  NABCEP 031508-1
SunRock Solar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131125/ed2fb8d1/attachment-0002.html>