[RE-wrenches] Best practices for conduit penetration on roof

[penobscotsolar at midmaine.com]

Try SolaDeck, Rich. It has a din rail inside for mini breakers and a
ground as well. We use them all the time with great results.
http://www.rstcenterprises.com/soladeck/

Daryl


> Wrenches,
> We typically run conduit for roof mounts over the edge of the roof to the
> eaves, rather than penetrate the roof whenever possible. An upcoming
> installation on an freshly asphalt shingled roof requires that we
> penetrate
> the roof for the conduit run (Enphase). I'm wondering if there are any
> suggestions for preferred flashing products and best known practices. It's
> always seemed to me that the typical Oatey type flashing dries and cracks
> eventually.
> Thanks for your insights..
> Rich
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>