[RE-wrenches] Unirac SolarMount rail caps

Jason Szumlanski jason at fafcosolar.com
Mon Aug 13 09:20:59 PDT 2012


I have put expanding foam inside the ends to prevent insects. As for the
finished look... never had the problem. We just do a clean cut with a sharp
blade and keep the length outside the module to a minimum.

Jason Szumlanski
Fafco Solar



On Fri, Aug 10, 2012 at 4:12 PM, Dana Brandt <dana at ecotechenergy.com> wrote:

> We just finished installing a system on SolarMount and the client is
> unhappy with how the ends of the SolarMount rail look. She says it looks
> unfinished and is concerned about bees nesting in them. I know there are
> other rail products with more finished looking ends but this system is
> already fully installed. Unirac has endcaps for the SunFrame, but those
> aren't compatible with SolarMount. Anyone run into this before? Thoughts on
> solutions?
>
> Thanks,
>
> Dana
>
> Dana Brandt
> Ecotech Energy Systems, LLC
> www.ecotechenergy.com
> dana at ecotechenergy.com
> 360.318.7646
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120813/3519ae3e/attachment-0004.html>


More information about the RE-wrenches mailing list